Mount for LED Light Towers

Tripod vs Round vs Turtle Base Mount for LED Light Towers

In outdoor locations, light installation options are limited. Construction sites, road repair projects and open-field work are examples of locations and activities that lack flat surfaces and walls for mounting. For deploying lights in the area, such challenges are addressed using portable led light towers. The units, which can reach heights up to 7 feet, are equipped with a sturdy base, allowing the LED lamps to stand on their own without reliance on flat surfaces, ceilings or walls.

Round Base, Turtle Base

Operators have several options for the base component of their LED light tower. Two common options include: turtle base and round base. Out of the two mounting methods, a turtle base is considered to be more sturdy. This type of foundation consists of C-legs (curving downwards), which add height to the structure and offers space-saving benefits, when compared to a traditional tripod.

On the other hand, a round base consists of a flat, circular component. This type of mounting base is not typically used for LED light towers. Instead, a round base is applicable to residential lamps, as well as poles with magnetic mount bases. The reason a round base is not recommended for outdoor, rugged locations is due to instability. Strong winds could easily knock down the lighting system.

Tripod Base

A tripod base is one of the most preferred foundational structures for portable LED light towers. An operator can easily deploy outdoor fixtures, due to its 3-leg feature. A fixture that incorporates a tripod base does not require a flat surface for stability. Each leg can stand on tilted ground and the structure will remain upright.

For ease of storage, an LED light mast with a tripod foundation may come with foldable features. Additionally, two wheels can be installed at the bottom to facilitate mobility around the outdoor work site.…

How to buy the best spotlights

LED Spotlights can help provide centered or accent light to your home, but you’ll need a fair few to light space, and if you are using halogen the expenses can really accumulate.

There’s a little bit more to consider when buying spotlights, too, in comparison to conventional lights. From what beam perspective you prefer, to whether you want to help make the move to LED, as well as getting the right color and intensity of light for your spots.

We explain what to look for and how to choose below.

  • Spotlight brightness: Spotlight lighting is measured in ‘useful lumens’, which is just a little dissimilar to how lighting is computed for a conventional bulb.
  • Limelight beam position: The beam position that the truth is defined on the box is defined as the angle at which 50% of the full total useful lumen result comes from the spotlight.

LED vs halogen spotlights

When we surveyed Which? people in May 2014, we found that halogens were still more popular than LED spotlights, with 43% owning halogen spotlights in comparison to 28% owning LED. However, this style appears to be changing with more and much more of you making the switch to LED in large part due to the higher efficiency and lifetime claim that they provide. Below we clarify the pros and cons of every, but for more information, check out our guide to LED lights.

Halogen lights

Halogens are relatively cheap and the light is comparable to an old-style incandescent in conditions of coloring and quality. However, they only last for around 2 years and are far more expensive to run than an LED.

An average LED spotlight appropriate that is on for two hours every day possesses six 50w halogen locations will definitely cost£6 annually to run, more than some refrigerator-freezers that are on all day, every day. Swap the halogens for 7.5w LEDs that produce the same amount of light and it will cost just £6 annually. More details.

How Much Should You Spend on A Spotlight?

You can pick up halogen spotlights for under £1, especially if you get a multipack. LED spotlights to tend to be more expensive, although the costs are dropping on a regular basis, and you could now buy fantastic LED spotlights for under £5 if going for a Best Buy lamp. Again, if you buy in multipacks, you’ll cut costs – plus it’s better to stick to one type where you can prevent compatibility issues as light shade or output can vary between brands and types.

LED Limelight Failures

LED spots to cost more than halogens to buy, so any failures can be hugely annoying and costly to displace. The durability trials have found that most LEDs previous the length, as claimed. If you are having problems with early on LED failures it might well be credited to problems with incompatible dimmer switches or your electrical power setup – so it is worth investigating possible triggers before quitting on LEDs, as there’s a good chance that it is not the LED spotlights that is the problem.

The probabilities are that more mature dimmers won’t work with LEDs and will even cause some LEDs that say they are dimmer-switch appropriate to break. So, it’s worth looking at with an electrician or contacting the bulb manufacturer to ensure you hold the right dimmer transition for your LED spotlights. Learn more details at:  http://www.larsonelectronics.com/c-603-temporary-construction-lights.aspx

led work lights for labs

Types of LED Work Lights for Labs

Laboratories facilitate very detailed and intricate work. Often times, illumination is required to support activities inside labs. Due to the unique aspects of such work spaces, it is important to understand the type of LED lights applicable to the room. Below takes a closer look at various types of LED Work Lights and levels of illumination needed to boost work performance inside laboratories.

LED Task and Overhead Lights

Overhead lighting systems are typically found in labs. The units serve as general lighting and can be found in lobbies, hallways and specific rooms. LED tube-style fixtures are frequently utilized for such lighting requirements. Furthermore, recessed LED lights can be used, which are ideal for saving space.

Another type of LED light found in laboratories is LED task lights. These units can take on different forms, depending on the needs of the specialist. For instance, in USDA labs, the buildings use cabinet task lights, installed under the cabinets to illuminate counter tops. Multi-level shelves may also incorporate the same lighting configuration – at various levels.

LED Illumination Levels

Light intensity inside labs must be carefully controlled, as glare can easily become an issue in extremely bright rooms (most labs are white to promote cleanliness and sanitation). Furthermore, laboratories these days are using more digital panels and computer screens. Overly bright illumination levels can decrease one’s ability to accurately view information on electronic screens.

Taking such above mentioned factors into consideration, LEDs should provide controlled illumination. IESNA Lighting Handbook 9th Edition 2000 sets forth recommendations for the amount of light suitable for labs. For science labs and specimen collecting, horizontal illumination of 50 fc and vertical illumination of 30 fc is ideal. According to the 8th Edition of the handbook, chemistry rooms should incorporate a range of 50 fc to 100 fc, depending on the type of analysis.…

vibration-dampener for industrail light towers

Types of Vibration Dampeners for Poles and Industrial Light Towers

Industrial light towers are useful for widespread illumination over busy work sites. In rugged environments, such as construction sites, outdoor locations and coastal regions, the units are prone to persistent vibration.

For lighting poles and portable light masts, sources of vibration include strong winds, exposure to heavy-duty equipment and nearby moving vehicles (for roadside construction projects). To address this issue, operators may utilize vibration dampeners to protect the lighting structure.

What is a Vibration Dampener?

A vibration dampener is a component found on poles, which absorbs vibration resulting in decreased structural fatigue. Compared to revamping the design of the pole, installing a vibration dampener on an existing pole is considered to be less costly. The lighting components can be field installable (very economical) or factory installed.

In addition to installing a vibration dampener on industrial light towers for construction sites and outdoor locations, operators can also select specific pole shapes that are capable of withstanding winds and persistent shaking. A round pole is considered to be more reliable against vibration than square poles.

Lighting poles should also be maintained and inspected properly for signs of degradation or structural fatigue.

Vibration Dampeners for Light Masts

There are several types of vibration dampeners for light towers and poles, such as chains, snakes, stockbridge dampers and canisters. The first three options are field installable, while the last one (canister) requires factory installation.

A chain-based vibration dampener is installed on the pole and sways naturally, based on the amount of vibration in the area. Shaking is decreased when the component comes in contact with the shaft (inside). A major drawback with using a chain-based dampener is noise.

Lastly, a factory-installed canister for industrial light masts is a set of disks that counteract the effects of vibration. Installed inside the pole, the components are compact and discreet.…

5 Practical Uses for LED Lights Aside Spotlights

INTRODUCTION

LEDs that are more valuable than other light for semiconductor diodes are the best choice for many homeowners if they adapt to these limitations and smart applications for home use. Although there are many ways to be used throughout the home aside just spotlight, some led spotlight work much better than others and clearly affect the explicit purpose of the medical profession’s expression.

  1. under cabinet lighting

One of the most traditional applications of semiconductor diode lighting, which is now home-made, home lighting, is a modern choice in many trendy kitchens and bathrooms. They add perfect perfection to every home that wants only a small illumination; in unusual places where he became a powerful LED gift. Semiconductor diodes are available in different styles and sizes that are used under the cabinet in the room or bathroom, and much of the co-owner is very inexpensive and profitable.

  1. Not used

A common and rational use of semiconductor diodes illuminates domestic or external devices such as garden paths or doors of the outer door. This semiconductor diode is the most efficient version of the light effects or connected lighting fixtures. It allows you to work on decorating and adding value for guests and family members to make light. You will understand them in almost every house, home and garden, and in many cases, the value can be less than $ 50 per set. Click here.

  1. Environmentally friendly lighting

Many people are looking for an eco-friendly lighting solution that reduces energy bills,in short, hollow hours. Semiconductor diodes are cost-effective and economical, making them a straightforward choice for anyone trying to tilt their carbon footprint. These are low-wall bulbs designed for eco-friendly products and are simple and fashionable lighting.

  1. Modern if you choose the decoration

Semiconductor diodes for practical purposes sometimes require coordination with existing interior design or the smallest amount that is not incompatible with fashion. Semiconductor diodes are modern and modern, and there are many models and styles that are suitable for home-made alternatives to large decorations. This applies to all applications inside and outside gardens and doors from home to thekitchen, living, feeding places, bathrooms, media areas, and even the rooms for adults and adults.

  1. Window lighting

Although most people consider cover and similar lighting to create accent lighting, a completely different software project, which can sometimes be turned on at home, comes from a semiconductor diode. For example, how much sunlight under the shelves is just because one of the factors is displayed on the next shelf. Similarly, solid-state headlamps can bring full focus (you want people to see this particular house), sometimes even if you do not have enough attention. Because they are economical and economical, you have several options in which you can buy only one or two more expensive styles.

CONCLUSION

From their durability to the very real savings that they can make for both home and business owners, LED light is efficient bulbs have many tangible and very real benefits. To find out if their installation can benefit your property, contact a lighting specialist to discover the right lighting solution for you especially for the led spotlight. Click here for more information: http://www.larsonelectronics.com/c-603-temporary-construction-lights.aspx

 

Preventing Microbial Corrosion for LED Construction Lights

In extreme work locations, such as construction sites and industrial facilities, corrosion is a major issue. Salt, acidic rain and dirt are common sources of corrosion that create problems for LED Construction Lights.

On a microscopic level, some microbes can also contribute to corrosion. Called microbial or bio-corrosion, this type of degradation on surfaces can be stopped using powerful inhibitors, including benzalkonium chloride-based solutions.

Microbial Corrosion (MIC) 101

Bio-corrosion is caused by bacteria that thrive in both aerobic (oxygen rich) and anaerobic conditions, making such creatures resilient to rugged elements. Moreover, this type of corrosion affects metallic and non-metallic materials (plastics, concrete and nylon).

Sulfate-reducing bacteria (SRB), sulfur-oxidizing bacteria and iron-oxidizing bacteria are the top culprits associated with bio-corrosion. During corrosion, the microscopic organisms produce and release harmful secretions, which degrade the surface and promote oxidation.

Preventing Microbial Corrosion

In construction sites, microbial corrosion exists around stainless steel pipes and large tanks. Because of this, LED lighting systems around such locations must be properly maintained to prevent damage.

One of the most effective methods for protection is storing LED work lights in dry areas after usage. Watery elements in extreme work sites are known to carry corrosive microbes. Furthermore, it is important to fully drain LED lights before storage.

Wipe downs are also effective in deterring bio-corrosion. As mentioned earlier, operators may deploy chemical treatments to prevent bacteria from populating rapidly on surfaces.

Outside of construction sites, microbial corrosion is prevalent in industrial operations. For instance, aviation fueling sites are plagued with ‘HUM bugs’ (Cladosporium resinae and Pseudomonas aeruginosa), which can compromise rubber gaskets, corrosion-resistant coatings and o-ring components.

Underground pipelines and petrol-handling systems at oil and gas sites are also prone to bio-corrosion. Lastly, nuclear facilities that use copper-nickel or brass pipes are ideal locations for corrosion-causing microbes to populate.…

Using Blue LED Lights to Boost Productivity in Industrial Work Sites

Using Blue LED Lights to Boost Productivity in Industrial Work Sites

The color of light you use at work could be causing you to feel tired and lazy – especially if you’re using fixtures with warm or reddish tones. In the past decade, numerous studies have shown the effects of lighting systems on productivity at the workplace.

In a nutshell, researchers were able prove that high-color temperature lamps with slightly bluish colors can help workers feel more alert and focused. By comparison, low-color temperature units, with reddish or dim characteristics, contribute to comfort and melatonin production.

But is it really that simple? Find out below.

Productivity and Lighting

Blue LED lights reduce tiredness by blocking our body’s ability to create melatonin. The hormone is primarily responsible for regulating natural sleeping patterns. Red LED lights have the opposite effect on humans. Exposure to this light color can cause individuals to feel sleepy and relaxed.

With this in mind, low color temperature LED fixtures are ideal for breakrooms, which can help promote adequate rest. Conference rooms can benefit from mid-color temperature lights. This neutral range is perfect for creating a welcoming meeting place.

Practical Tips

From a practical perspective, it is not possible to mimic the same lighting conditions used in studies related to blue light and productivity. Most trials required a participant to be exposed to a powerful lamp for long periods of time, in some cases as long as 6.5 hours. Workers, including in commercial offices, aren’t usually that idle.

Moreover, direct exposure to blue light can cause headaches and eyestrain, when glare is created in the workspace. In order to improve productivity with blue LED lights, it is recommended to stick with high-color temperature fixtures in the range of 5,500K and 8,000K. Lastly, if your work station is near a window, it is important to strike a balance between natural sunlight and artificial lighting.…

Wobble Lights

LED Wobble Lights Applications for Construction and Industrial Work Sites

For LED lamps on construction sites, a simple and powerful design is needed to ensure reliability in rugged conditions. Complicated and flimsy mounts are sometimes difficult to implement in such locations, due to lengthy installations requiring tools and stable structures. LED wobble lights are superior solutions for such limitations typically encountered with deploying portable fixtures on uneven ground or extreme environments requiring close observation of safety.

Read on to learn more about how the LED light works and its applications in construction and industrial work sites.

Strong Foundation, Robust Illumination 

The main feature of an LED wobble light is its well-balanced foundation. The unit sits on a round base that is counter weighted, so that when a worker accidentally bumps into the unit, it will remain upright. During an encounter, a bit of wobbling is needed for the lamp to return to its original position (hence, the name).

As a rugged light that is deployed as close to the target as possible, the lamp’s parts must be protected with sturdy material, such as polycarbonate. Furthermore, the fixture should be diffused to prevent the creation of glare and to reduce the possibility of blinding for workers within close proximity of the unit.

Since direct contact with workers on the construction site is expected, the LED lamps may also incorporate active cooling features to avoid hot encounters with the portable fixture.

LED Wobble Light Applications

LED wobble lights have numerous uses on construction sites and other industrial projects. They can be utilized during inspections, HVAC installations, tank cleaning, maintenance and more. Explosion proof variants are suitable for work in confined spaces and flammable locations.

Most LED wobble lights can illuminate a target from distances between 15-30 feet. As a luminary capable of 360-illumination, the unit can easily replace 2-3 directional lamps on the work site.

 

 

 …

illuminated sign boards

MUTC Recommendations For Using Illuminated Sign Boards During Road Construction

Illuminated Sign Boards

The Manual on Uniform Traffic Control Devices for Streets and Highways (MUTCD) is a set of widely implemented guidelines, which governs the installation, application and maintenance of equipment used in US-based roadways.

Published by the Department of Transportation’s Federal Highway Administration (FHWA) and frequently referenced by OSHA, the standards provide best practices for using illuminated sign boards in work zones during roadside construction. The recommendations provided by MUTCD are effective in reducing light glare and improving detection of traffic signals.

Arrow Board Classifications and Sizes

Also known as “chevron signs,” arrow boards are used to notify drivers about the presence of work zones and road closures. These accessories vary in size, depending on the needs of the construction project and type of road. For low-speed roadways, small or medium-sized units are recommended, while high-speed locations require the use of large arrow boards for timely detection at far distances.

The MUTCD sets forth the following categories for arrow boards, based on size: Type A (48″ x 24″), Type B (60” x 30”), Type C (48” x 96”) and Type D (no size specification – only requirement is arrow size: 48” x 24”). Type D arrow boards are suitable for mounting on vehicles inside construction work zones, such as a paver or an industrial sweeper.

Operating Modes and Dimming

The robust sign boards support several operating modes for managing road conditions. For tasks performed at the shoulder and when lane closure is not required, caution mode is typically applied.

Like all lighting systems for roadside construction, blinding must be avoided at all costs. To reduce such occurrences, the MUTCD advises the utilization of a dimmer for arrow boards. Regulators recommend 50-percent dimming capabilities (based on the unit’s daytime settings) for nighttime conditions, as well as the use of light sensors for automated dimming controls.

For more information about traffic lighting systems, please visit Larson Electronics.…

baloon lights

Balloon Lights For Glare Free Illumination

Construction sites are extremely rugged and unpredictable, making such locations perfect candidates for the latest lighting technologies available on the market today. Light towers are common units found in construction sites, which are used for wide-area illumination over the location.

These luminaries provide elevated lighting and utilize powerful beams to enhance clarity for nearby workers. Traditional light masts incorporate standard-design lamps; however, this does not mean businesses are limited to using such fixtures. These days, businesses in the construction sector are deploying modern balloon lights at the job site for superior illumination.

Basics

Industrial balloon lights are large, inflatable luminaries that emit beams in a 360-degree configuration. The beam is often soft and glare-free, compared to traditional outdoor lamps that leverage tight beam configurations. These units can be mounted on poles or stands and incorporate water-resistant material to protect the internal components of the balloon. Furthermore, workers could look directly at the luminaries without suffering from temporary blindness.

Deploying balloon lights at construction sites can be completed in five minutes or less. Using an internal fan located inside the deflated unit, operators simply turn the inflator on while small holes around the balloon manage the volume of air. Some balloon lights don’t come with an internal fan, in order to prevent dirt from building up inside. For such models, a separate battery-powered blower could be used to inflate the balloon.

Options

Balloon lights address several challenges with using traditional light towers at construction sites. These luminaries do not have to be continuously re-positioned, since they already offer 360-degree illumination. Both options are stable under windy conditions, with conventional light masts providing peace of mind for operators (less prone to getting blown away).

To conclude, balloon lights are viable alternatives for compact light towers at construction sites. For a comprehensive approach to illumination, businesses may consider using standard light towers over large sections of the job site, while using balloon lights for illumination over specific tasks.…